Setting The Temperature; Setting The Timer - Dometic FreshWell3000 Operating Manual

Dometic FreshWell3000
8.7

Setting the temperature

I
NOTE
The under-bench air conditioner must be switched on.
Cooling Mode
In the "Cooling" (
temperature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a
high note.
✓ The temperature is set on the under-bench air conditioner.
Heat Pump Mode
In the "Heat Pump" (
and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a
high note.
✓ The temperature is set on the under-bench air conditioner.
8.8

Setting the timer

The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time, the switch-off time or both values. The
time can be set in 10 minute increments.
I
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
➤ Before programming the timer, select the air conditioning mode and all
required values (e.g. temperature).
EN
Operating the under-bench air conditioner
), and "Dehumidifying" ( ) modes, you can specify a
) mode, you can specify a temperature between 16 °C
23