Installation - Miele CS 1212-1 Operating And Installation Instructions

Installation

Preparing the worktop
 Make the worktop cut-out as shown
in "Building-in dimensions" or as
calculated (see "Installation of several
appliances"). Observe the safety
distances (see "Safety distances").
Wooden worktops
 Seal the cut surfaces on wooden
worktops with a suitable sealant to
avoid swelling caused by moisture.
The sealant must be heat-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
48
 Position the spring clamps  and
spacer bars  on or at the top edge
of the cut-out in the positions shown.
 Secure the spring clamps  and
spacer bars  with the 3.5 x 25 mm
wood screws supplied.