2.5 2.5-inch HDD
Procedure 5 Connector Check and Replacement Check
The HDD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
Check 2
Check 3
Check 4
Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300
Downloaded from LpManual.com Manuals
Make sure the following connectors have been firmly connected to the
HDD, system board and CPU.
HDD
The HDD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
The System board may be damaged. Replace it with a new one following
the disassembling instructions in Chapter 4. If the problem persists,
perform Check 4.
The CPU may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4.
System board
Maintenance Manual
2 Troubleshooting
CPU
2-15