Ccd Board And Mic - Toshiba Satellite L300 Maintenance Manual

4 Replacement Procedures

4.16 CCD Board and MIC

Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-31.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
3. Lift the MIC from the display rear cover.
4-52
Downloaded from LpManual.com Manuals
Display rear cover
Figure 4-31 Removing the CCD board and MIC
Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual

4.16 CCD Board and MIC

MIC cable
CCD module
CCD cable