Procedure 4 Test Program Check - Toshiba Satellite L300 Maintenance Manual

2 Troubleshooting

Procedure 4 Test Program Check

Run the HDD test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-1. If an error code is not generated
and the problem still exists, go to Procedure 5.
Code
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
2-14 Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300
Downloaded from LpManual.com Manuals
Table 2- 1 HDD Error Code and Status
Get Parameter Fail !
Read Old Data Error
Write Pattern Error
Read Back Data Error
Data Compare Error
Restore Data Error
Read Verify Error
Seek Error
Disk Controller Self Test Failed
Disk Controller Test unexpected interrupt Failed
Disk Controller action Test Failed
Disk dos not support SMART
Disk read attribute threshold error
Disk read attribute value error
Disk SMART attribute value error
Status
2.5 2.5-inch HDD
Maintenance Manual