Warning Systems
Engine-Coolant-Temperature-Warning Light
The engine-coolant-temperature-warning light illuminates,
the horn is actuated, and the cutting units stop when the
engine becomes too hot
(Figure
Figure 15
1. Engine-coolant-temperature-warning light
Note: The flail rotors disengage when the operating
temperature reaches 115°C (239°F).
Hydraulic-Fluid-Temperature-Warning Light
The hydraulic-fluid-temperature-warning light illuminates
when overheating occurs and the horn is actuated when the
hydraulic fluid in the reservoir exceeds 95°C (203°F); refer
to
Figure
16.
Figure 16
1. Hydraulic-fluid-temperature-warning light
15).
Battery-Charge-Warning Light
The battery-charge-warning light illuminates when the battery
is low of charge
(Figure
1. Battery-charge-warning light
Engine-Oil-Pressure-Warning Light
The engine-oil-pressure-warning light illuminates when the
oil pressure is too low
1. Engine-oil-pressure-warning light
Audible Warning Horn
Press the horn button to provide an audible warning
19).
Important: The horn is automatically actuated when
an engine coolant or hydraulic-fluid-overheat condition
occurs. Shut off the engine immediately and fix the
machine before starting it again.
1. Horn
18
17).
Figure 17
(Figure
18).
Figure 18
Figure 19
(Figure