Fuel Tank Removal; Fuel Tank Installation - Toro TimeCutter SW4200 Service Manual

CHASSIS

Fuel Tank Removal

1. Remove LH fender as shown in this chapter.
2. Disconnect and properly secure the (2) fuel / vent
lines from the top of fuel tank assembly (G).
(Fig. 013)
G
3
3. Remove the (2) fuel tank retaining springs (H) by
pulling them outward (Fig. 014).
4. The fuel tank is now loose and can be removed
vertically from the frame.
3-6
Fig. 013 PICT-1054
H
Fig. 014 PICT-1042

Fuel Tank Installation

1. Position fuel tank assembly (G) into the frame slots.
2. Install the (2) fuel tank retaining springs (H) to
secure fuel tank to the frame.
3. Properly connect the (2) fuel / vent lines.
4. Install LH fender as shown in this chapter.
5. Verify proper installation of the fuel tank and fuel /
vent lines.
(Fig. 015)
H
H
Fig. 015
Toro TimeCutter SW/SWX Service Manual
G
PICT-1041