Filling The Engine With Oil; Product Overview - Toro 20053 Operator's Manual

Figure 7
1. Starter rope

2. Filling the Engine with Oil

Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 8).
Figure 8
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 8). Do not
overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
2. Rope guide

Product Overview

Figure 9
1. Recoil start handle
2. Handle knob (4)
3. Fuel tank cap
4. Side discharge
5. Air lter
Figure 10
1. Side discharge chute
5
6. Primer
7. Spark plug
8. Cutting height lever (4)
9. Oil ll/Dipstick
10. Blade control bar
2. Rear discharge plug (installed)