Using.the.system.reset.function - Omron GOSMART HJ-112 Instruction Manual

USING THE SySTEM RESET FUNCTION
Use the SySTEM RESET function in the following cases:
.•.When.the.battery.is.replaced.
.•.When.you.want.to.delete.the.memory.
.•.When.the.display.becomes.unrecognizable.
1.
Press the SySTEM RESET Button on the
back of the main unit with a thin stick that
is not easily breakable.
All.the.data.stored.in.the.memory.and.the.
set.data.(time,.weight,.and.stride.length).are.
deleted.
2.
Set the time, weight, and stride length
again.
After.all.characters.on.the.display.are.turned.on,.
the.initial.time.setting.display.appears..
(Refer.to.Setting.the.Time.on.page.12).
20