Toshiba 32P2400 Series Owner's Manual page 11

Use the Manual Tuning operation if desired
channels cannot be preset with the Auto
Tuning or if you would like to preset channels
to specifi c position numbers one by one.
Manual Tuning
Pos.
0
1
2
3
4
5
6
7
8
Press  or  to select the programme position
you want to arrange and press OK to display the
breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
1 B/G A C
A C E
B D
A. Position selection
B. System (Sound) (- page 29)
C. Colour System (- page 29)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (-
page 29).
D. Position skip selection
Press  or  to turn the position skip option
on "8" or off "(". The position will then be
skipped when you select channels with PU
or Pu. The "8" mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classifi cation.
F. Channel
The channel number on which a station is
being broadcast.
Label
1 0 On
G I
F H J
G. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H. Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or Off .
J. Label
Station labels appear under the programme
position display each time you turn on the TV,
select a channel, or press
To change or create station labels:
1) Press  or  repeatedly to select a
character for the fi rst space, then press 
or .
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a
blank space from the list of characters.
Press OK to store your settings.
NOTE:
• The Quick Setup, Location, Auto Tuning, Manual
Tuning menu can also be display at any time from
the SETUP menu.
• When you preset the channel which sound of
broadcast transmission system adopts "M" system
(- page 29), the sound system may not be tuned
correctly if the radio waves transmit badly. At that
time, preset the channel by Manual Tuning.
– 11 –
.
(blank space)