Samsung SCC-B5331 User Manual page 21

high spot light source at night.
If you press the SETUP switch in item 1 or 2 of
the MASK AREA menu, you will see a menu
where you can specify an area to MASK.
MASK AREA
<SIZE>
<LOCATION>
You can specify MASK 1 and 2 simultaneously.
The MASK is only for determining the mode
switching, and any excessive bright area at night
will be excluded by the confi gured MASK.

Note :
If BACKLIGHT is set to BLC, the MASK AREA function will
–
be deactivated.
❖
WHITE BAL
If you want to adjust the color scheme, use the
WHITE BALANCE function.
• DAY
In DAY mode, you can set the color values of
RED and BLUE. The screen will be displayed in
How to use OSD Menu
[DAY/NIGHT]
colors according to your settings.
WHITE BAL
DAY/NIGHT
MODE
RED
BLUE
R-GAIN
B-GAIN

Note :
You can set the values of R-GAIN and B-GAIN only in
–
AWC mode.
• NIGHT
Use the NIGHT mode if you want to set the white
balance differently according to the ambient
luminance.
If the NIGHT mode is set to OFF, the white
balance will always operate as set in DAY mode;
if not to OFF, the camera will switch to as set in
DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED,
BLUE and BRIGHTNESS. The screen will be
displayed in colors according to your settings.
DAY
AWC
[00]----I----
[00]----I----
[0248]
[0247]
English 21
–