Samsung SCC-B5331 User Manual page 20

How to use OSD Menu
❖
DAY/NIGHT
• DAY
If set to DAY, it will be fi xed to DAY mode
regardless of the ambient conditions.
• NIGHT
If set to NIGHT, it will be fi xed to Black-and-White
mode regardless of the ambient conditions.
If you press the SETUP switch with a NIGHT sub
menu selected, you will see a menu where you can
set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output
together with the black-and-white composite video
signal. If BURST is set to OFF, the Burst signal does
not output.
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
• AUTO
The camera will automatically switch between
DAY and NIGHT mode, according to the lighting
condition.
If you press the SETUP switch with an AUTO-
based sub menu selected, you will see the
appropriate screen.
20 – DIGITAL COLOR DOME CAMERA
[DAY,NIGHT,AUTO,EXT]
AUTO
BURST
DAY NIGHT
BRIGHTNESS
DWELL TIME
NIGHT DAY
BRIGHTNESS
DWELL TIME
MASK AREA
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAY NIGHT sets the
brightness degree of color to BW switching,
for which you can select from LOW, MID, and
HIGH. As you adjust it from HIGH to LOW, the
screen switches to black and white mode under
the darker situation.
DWELL TIME of DAY NIGHT sets the time to
maintain switched black and white mode.
The BRIGHTNESS of NIGHT DAY sets the
brightness degree of BW to color switching, for
which you can select from LOW, MID, and HIGH.
As you adjust it from HIGH to LOW, the screen
switches to color mode under the darker situation.
DWELL TIME of NIGHT DAY sets the time to
maintain switched color mode.
The MASK AREA menu is used to prevent
unintended mode switching or inability of
determining the switching due to existence of
OFF
MID
2S
MID
5S
1 2