Table of Contents
Advertisement
10
4. Connect a CAT-5 or better Ethernet cable to a compatible 802.3af power source and run the cable to the
installation site. Ensure there is sufficient slack on the cable to perform the installation steps.
NOTE
2.2 Precautions
Before installing an AP6522 model Access Point, verify the following:
• If a DC power supply is used, ensure it's the approved power supply for the AP6522 (PWRS-1400-148R).
• Motorola Solutions recommends you do not to install the AP6522 in wet or dusty areas.
• Verify the environment has a continuous temperature range between 0° C to 40° C.
When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable
is recommended for Gigabit operation.
AP6522 Access Point
Advertisement
Table of Contents
