Binatone ADVENTURER 450 User Manual page 6

3.7 Setting the Roger Beep
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This is to inform the
receiving party that you have intentionally ended the
transmission, and you are now in receive mode.
a. Press the MENU button 5 times,
LCD Screen .
b. P ress the UP or DOWN
displayed on the LCD screen
displayed on the LCD screen
PTT
button to confirm your setting.
c.
Press the PTT
3.8 Setting the Key Tone ON or OFF
This feature allows the PMR to emit a confirmation tone after
pressing each button.
a. Press the MENU button 6 times,
LCD Screen .
b. P ress the UP or DOWN
displayed on the LCD screen
displayed on the LCD screen
PTT
button to confirm your setting.
c.
Press the PTT
3.9 Setting the Dual Watch Mode
Your PMR is capable of monitoring two channels, the current
and another (dual watch) channel. If the unit detects a signal
on either channel, it will stop and receive the signal.
a.
Press the MENU button 7 times, "
"OF"
while flashes on the LCD Screen.
b.
P ress the UP or DOWN
channel (1~8, except the current channel).
c. Press the MENU button to change the CTCSS code.
d. P ress the UP or DOWN
CTCSS code (1~38.).
PTT
button to confirm your setting.
f.
Press the PTT
In Dual Watch mode, the LCD screen will alternately display
the Current and the Dual Watch channel numbers.
3.9.1 To End the Dual Watch Mode
a.
Press the MENU button 7 times, the channel number
flashes on the LCD Screen.
b. P ress the UP or DOWN
the LCD Screen.
PTT
button to exit.
c. PTT
Press the
3.10 Activating the Channel Scan
Channel scan perform searches for active signals in an
endless loop for all 8 channels, and all 38 CTCSS codes.
a. Press the MENU and
LCD Screen will display "
changes rapidly. When an active signal is detected,
channel scan pauses on the active channel
b. P ress the UP button to continue scanning the main
channels 1~8.
Binatone Help Line - 0845 345 9677
"ON "
flashes on the
"ON"
button to activate ( will be
"OFF"
) or deactivate ( will be
) the Roger Beep feature.
"ON "
flashes on the
"ON"
button to activate ( will be
"OFF"
) or deactivate ( will be
) the Key Tone feature.
DCM " will be displayed
button to select the Dual Watch
button to select the desired
"OF"
button until is displayed on
UP buttons at the same time. The
SCAN " and the channel number