Cub Cadet GT 2000 Operator's Manual page 17

Engaging the PTO
Engaging the PTO transfers power to the cutting deck or other
(separately available) attachments. To engage the PTO:
1. Move the throttle control lever to the FAST
2. Pull the PTO/Blade Engage lever
position. See Fig. 5-3.
Figure 5-3
NOTE: When operating the tractor be certain that the throttle
lever is always in the FAST
the throttle at less than full throttle may lead to premature
battery wear and a poor quality cut.
position.
upward into the ON
(rabbit) position. Operating with
s 5 — O
ectiOn peratiOn
17