Table of Contents
Advertisement
Installing an SD Card
This section describes how to mount and initialize an SD card. Insert the
SD card into the SD card slot on the left side of the machine. Read the
precautions in
Installation(P. 3) before installing the SD card. Note that
the data in the machine that is stored to the SD card is all subjected to
encryption. This ensures safe use of the SD card on a computer or in other
situation because the encrypted data in the SD card is protected against
unauthorized extraction.
●
Before mounting the SD card, check whether the SD card is write-protected. If the card is write-protected,
unlock the card before inserting it.
1
Turn OFF the machine, and unplug the power plug from the AC power outlet.
●
When you turn OFF the power, shut down the machine from the operation panel without using the power
switch.
Turning OFF the Power (Performing a Shutdown)(P. 34)
2
Remove the SD card slot cover.
1
Use a coin to remove the screws.
2
Open the SD card slot cover, and remove it in the direction indicated by the arrow.
Appendix
633
0YSF-080
Advertisement
Table of Contents
