KTM 1190 RC8 Owner's Manual page 68

OPERATING ELEMENTS
–
Press the button
–
Press the button
–
Press the MODE button briefly.
–
Press the button
–
Press the MODE button briefly.
LAP BLANK T. appears in the info display.
Info
At delivery, LAP BLANK T. is set to 1 second.
400461-01
Tip
With LAP BLANK T., you can prevent the lap from being timed too short. This may
happen if you accidentally press the LAP button twice in a row.
–
Set the blank time of the LAP button with the
Info
LAP BLANK T. can be set between 1 and 200.
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
–
Press the button
display.
–
Press the MODE button briefly.
–
Press the button
info display.
–
Press the MODE button briefly.
and the button for 3 - 5 seconds.
twice until the symbol is on SETTINGS in the info display.
once until the symbol is on LAP BLANK T in the info display.
briefly and repeatedly until the symbol
briefly and repeatedly until the symbol
button or the button.
is on BACK... in the info
is on EXIT SETUP in the
66