KTM 1190 RC8 Owner's Manual page 165

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Disconnect plug-in connector
–
Push off the retaining clamp
–
Remove headlight bulb.
–
Position the new headlight bulb in the headlight housing.
Low beam / high beam (H7) (
Info
Insert the headlight bulb so that the lug is positioned in the cut-out.
700299-01
–
Position the retaining clamp.
–
Position the plug-in connector.
.

on both sides, squeeze and fold to the side.

p. 217)
163