Vivotek SD9361-EHL User Manual page 54

VIVOTEK
Image settings
On this page, you can tune the White balance and Image adjustment settings.
Sensor Setting 1:
For normal situations
White balance: Adjust the value for the best color temperature.
■ Select one of the white balance modes:
1. Outdoor (system default): Using this mode enables the camera to capture images with natural white
balance observable in the morning.
2. Fluorescent light: 3,200K base mode, suitable for indoor applications.
3. Sodium vapor lamp: This mode applies to streets and highway lit by sodium vapor lamps.
■ Fix current value: This option is available when the tuning the white balance. When selected, the
camera will use the current color temperature setting. Note that you should use the Save button below
to preserve current configuration. Otherwise, the white balance mode will return to Auto after you leave
the configuration page.
■ Manual: In the manual mode, you can manually tune the R gain and Blue gain values by dragging the
slide bars. Index numbers will be shown on the right hand side while changes in image is immediately
displayed.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%.
■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.
Defog: Defog helps improve the visibility quality of captured image in poor weather conditions such as
smog, fog, or smoke.
54 - User's Manual