Vivotek SD9361-EHL User Manual page 172

VIVOTEK
s<0~(m-1)>_e <boolean>
nableeptz
s<0~(m-1)>_c Listed at "capability_videoin_codec"
odectype Possible values are: mjpeg, h264,h265
<product dependent>
s<0~(m-1)>_re Available options are list in
solution "capability_videoin_c0_resolution".
s<0~(m-1)>_h <boolean>
264_dintraperio
d_enable
s<0~(m-1)>_h 250, 500, 1000, 2000, 3000, 4000
264_intraperiod
s<0~(m-1)>_h cbr, vbr
264_ratecontrol
mode
s<0~(m-1)>_h 1~5,
264_quant 99, 100
s<0~(m-1)>_h 0~51
264_qvalue
172 - User's Manual
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
4/4 Indicate whether stream supprts eptz
or not
1/4 Codec type for this stream
1/4 Video resolution in pixels.
4/4 Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_dint
raperiod_support" is 1.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0301c.
4/4 The time interval between two
I-frames (Intra coded picture).
The unit is millisecond (ms).
cbr: Constant bit rate mode.
4/4
vbr: Fixed quality mode, all frames are
encoded in the same quality.
4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only valid when "ratecontrolmode"=
vbr.
4/4 Manual video quality level input. The Q
value which is used by encoded library