Vivotek SD9361-EHL User Manual page 101

VIVOTEK
Home location settings
Move your current field of view to a preferred location using the PTZ panel or mouse clicks
on the screen, and use the below buttons to configure the current view as the default home
position. You can also restore the home posiotion to the factory default, which is approximately
45 degree looking down with the lens lined up with the VIVOTEK logo.
Patrol list
This column displays the configured patrols. Note that only one patrol can apply at a time. Use
the ON/OFF buttons to enable/disable an existing patrol.
Use the buttons below to create a recorded patrol or a preset patrol.
Recorded Patrol
The recorded patrol allows you to record the process moving along interested points (positions)
in your surveillance area while the camera memorizes every Pan/Tilt/Zoom/Focus commands
you gave in the process. You can then save the process as a recorded patrol. Due to the
limitation on system memory, you can configure 4 recorded patrols, each with a length of 2
minutes.
P6
P8
P9
P7
P5
P3
P1
Stop points
P4
P2
User's Manual - 101