Panasonic TH-32LRT12A Operating Instructions Manual page 5

Ventillation should not be impeded by covering the ventillation openings with items such as newspapers,
table cloths and curtains.
For sufficient ventialltion:
If using the pedestal (optional accessory), leave a space of 10 cm or more at the top, left and right, and 7 cm
or more at the rear, and also keep the space between the bottom of the display and the floor surface.
If using some other setting-up method, follow the manual of it. (If there is no specific indication of installation
dimension in the installation manual, leave a space of 10 cm or more at the top, bottom, left and right, and 7
cm or more at the rear.)
When using the LCD Display
The LCD Display is designed to operate on 220 - 240 V AC, 50/60 Hz.
Do not cover the ventillation holes.
• Doing so may cause the LCD Display to overheat, which can cause fire or damage to the LCD Display.
Do not stick any foreign objects into the LCD Display.
• Do not insert any metal or flammable objects into the ventillation holes or drop them onto the LCD Display, as doing
so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the LCD Display. For any inspection,
adjustment and repair work, please contact your local Panasonic dealer.
Ensure that the mains plug is easily accessible.
Do not use any power supply cord other than that provided with this unit.
• Doing so may cause fire or electric shocks.
Securely insert the power supply plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket is loose, they shall not be used.
Do not handle the power supply plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug
body, not the cable.
• Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is
damaged, have it repaired at your local Panasonic dealer.
If the LCD Display is not going to be used for any prolonged period of time, unplug the power supply plug
from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out
from the LCD Display, immediately unplug the power supply plug from the wall outlet.
• If you continue to use the LCD Display in this condition, fire or electric shock could result. After checking that the
smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the
LCD Display yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the LCD Display, if the LCD Display is dropped, or if the cabinet
becomes damaged, disconnect the power supply plug immediately.
• A short circut may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need to
be made.
Safety Precautions
5