Remote Control Transmitter - Panasonic TH-32LRT12A Operating Instructions Manual

Remote Control Transmitter

POWER button
The Monitor must first be plugged
into the wall outlet.
Press this button to turn the Monitor
on, from standby mode. Press it
again to turn the Monitor Off to
standby mode.
MENU button
Displays the menu screen.
(see page 19)
OK button
Press to make selections.
POSITION buttons
RECALL button
Press to display the current input
signal mode.
ASPECT button
Press to adjust the aspect.
This button can be used only in AV
input signal. (see page 18)
Channel buttons
Press the buttons to adjust the
channel. These buttons are also
used for to adjusting digital channel
when a tuner pack is installed. For
more information, please refer to the
tuner pack's manual.
INPUT
POWER
MENU MUTE
RETURN
RECALL ASPECT OFF TIMER
CH VOL
TNQ4CM051
DISPLAY
Basic Controls
INPUT button (see page 15)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
RETURN button
Press the RETURN button to return
to previous menu screen.
OFF TIMER button
The Monitor can be preset to switch
to standby mode after a fixed period.
Each time the button is pressed, the
timer is changed with an interval of
10 minutes.
10 20 30
40
OFF 120
When the timer is set, the Monitor will
display a notification countdown 3
minutes before it switches to standby
mode.
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
50
60
17