Table of Contents
Advertisement
Safety Precautions
CAUTION
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
• Wall-hanging bracket (angled) ..................................................TY-WK32TM1
• Wall-hanging bracket ................................................................TY-WK32TM2
Always be sure to ask a qualified technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from
being played with by young children, creating the potential risk of suffocation.
Do not place the LCD Display on sloped or unstable surfaces.
•
The LCD Display may fall off or tip over.
Do not place any object on top of the LCD Display.
•
If water spills onto the LCD Display or foreign objects get inside it, a short-circuit may occur which could result in
fire or electric shock. If any foreign objects get inside the LCD Display, please consult your local Panasonic dealer.
Transport only in upright position!
•
Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
To Prevent the Display From Falling
Required accessories:
1. Use the wood screw to attach the holding strip to the
base table (C).
Note:
If the base table has no hole, align with the hole on the
holding strip and dig one on the base table.
2. Screw the holding strip to the pedestal (B).
Note:
Make sure that the holes on the holding
strip are properly aligned with the
pedestal and the base table to ensure
stability and prevent the Display from
falling down.
4
(All of the following accessories are manufactured by Panasonic Corporation.)
Holding Strip (1)
A
Assembly screw (1)
B
size: 4 mm x 10
Wood screw (1)
C
B
C
A
Advertisement
Chapters
Table of Contents
