Figure 2.7:Digital Output Tab In Device Test Dialog; Hardware Uninstallation - Omega Engineering USB-4761 User Manual

.
Figure 2.7: Digital Output Tab in Device Test Dialog
Only after your module device is properly set up, configured and tested,
can the device installation procedure be considered complete. After the
device installation procedure is completed, you can safely proceed to the
next chapter, Signal Connections.

2.6 Hardware Uninstallation

Though the USB modules are hot swappable, we still recommend you to
follow the hardware un-installation procedure to avoid any unpredictable
damages to your device or your system.
Step1: Close the applications of the USB module (ex. DeviceManager).
USB-4761 User Manual 18