The OMG-USB-DIO48 provides six eight-bit ports that may be individually configured as inputs or outputs. What’s Included The OMG-USB-DIO48 is shipped with the following items. If any of these items is missing or damaged, contact the supplier. OMG-USB-DIO48 Adapter Software CD...
Technical Technical Description The OMG-USB-DIO48 provides 48 channels of digital I/O configurable as inputs or outputs. Applications include PC based control and automation of sensors, switches, satellite antenna control systems, video and audio studio automation, security control systems, and other industrial automation.
74ABT245 octal bi-directional transceiver. Each input is capable of sinking up to 64 mA, while each output can source up to 32 mA. The OMG-USB-DIO48 requires a 5V power source and is shipped with a 5V power supply rated at 2.4 A.
Figure 2 below provides the bussed resistor and corresponding port. The resistors insure that no line is floating which is not connected. This provides consistent biasing on all un-terminated lines. Bussed Corresponding Resistor Figure 2- Pull Up Resistors OMG-USB-DIO48 Technical Port Port A1 Port B1 Port C1...
Banks and Ports The OMG-USB-DIO48 has two 50 pin headers. Each 50 pin header is a bank of three ports, comprising a total of six eight bit ports. Each port is eight bits wide and may be configured as an input or output port. Figure 3 below gives the bank and port organization.
50 pin ribbon cable pin out Each of the two 50 pin ribbon cable headers has the following pin out as shown in Figure 4. Description Figure 4- 50 Pin Header/Ribbon Cable Pin out OMG-USB-DIO48 Technical Pin # Port A Port B...
Addressing vs. Absolute Addressing for more information. Interrupts: Interrupt sampling can be set up in the API. Port A1 bit zero (0) is the interrupt source (pin 47 of P2). Refer to the API section in the SeaI/O help file for more information. OMG-USB-DIO48 Page 7...
Humidity Range 10 to 90% R.H. Non-Condensing Power Consumption Supply line Rating Mean Time Between Failures (MTBF) Greater than 150,000 hours. (Calculated) OMG-USB-DIO48 Specifications Storage -20º to 70º C (-4º to 158º F) 10 to 90% R.H. Non-Condensing +5 VDC...
Use the SeaIO control panel applet for card identification and configuration. If these steps do not solv e your problem, please call Omega Technical Support, 1-800-DAS-IEEE. Our technical support is free and available from 8:30AM-6PM Eastern Time Monday through Friday. OMG-USB-DIO48 Appendix A - Troubleshooting Page 13...
DAS-IEEE RETURN AUTHORIZATION MUST BE OBTAINED FROM OMEGA BEFORE RETURNED MERCHANDISE WILL BE ACCEPTED. AUTHORIZATION CAN BE OBTAINED BY CALLING OMEGA CUSTOMER SERVICE AND REQUESTING AN AUTHORIZED RETURN (AR) NUMBER. OMG-USB-DIO48 Appendix B - How To Get Assistance Page 14...
Always use cabling provided with this product if possible. If no cable is provided or if an alternate cable is required, use high quality shielded cabling to maintain compliance with FCC/EMC directives. OMG-USB-DIO48 Appendix D - Compliance Notices “Safety information...
Page 21
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.
Page 22
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at www.omega.com TEMPERATURE Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies Wire: Thermocouple, RTD & Thermistor Calibrators & Ice Point References Recorders, Controllers & Process Monitors Infrared Pyrometers PRESSURE, STRAIN AND FORCE Transducers &...