Self-Timer Setting - Panasonic HX-DC10 Operating Instructions Manual

Self-timer setting (page 35)
By assigning an operation shortcut to the SET button (page 76), you can set
the self-timer from the Recording Screen.
HINT
To cancel the self-timer function...
i If the [O] button or [@] button is pressed again before the shutter is
released, the self-timer countdown is cancelled.
i For video photography, recording does not stop automatically.
i The self-timer is automatically reset to off N after recording is ended and
the camera turned off.
When x is selected...
i When the [O] button or [@] button is
pressed, the status indicator will blink for
about 10 seconds, and then the image
is captured. Also, the countdown
indication shown in the illustration to the
right appears on the LCD monitor.
When y is selected...
i When the [O] button or [@] button is
pressed, the status indicator will blink
and the indication shown in the
illustration to the right appears on the
LCD monitor to indicate when the
shutter will release.
<2 seconds before>
<1 second before>
Shutter release
VQT3P24
67