Panasonic HX-DC10 Operating Instructions Manual page 118

HINT
About the USB cable
i Use only the supplied USB cable. Operation is not guaranteed if a different
USB cable is used.
i When using the SDXC Memory Card with a computer, please visit the
support web site shown below.
http://panasonic.net/avc/sdcard/information/SDXC.html
If the "Disconnect USB cable" message appears...
i Disconnect the USB cable once, then connect it again.
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
i Please connect the USB cable to your computer's USB terminal. Do not
connect it to the USB port on your monitor or keyboard, or to the USB hub.
In some instances, it may not be possible to correctly install the driver
software.
Do not exchange data bi-directionally
i While copying data from the camera to the computer in the card reader
mode, do not perform any operation that would copy the computer data to
the camera.
118
VQT3P24