Panasonic HX-DC10 Operating Instructions Manual page 146

3
Operate with the remote control for the TV.
1)
20.12.2011 0:00
3.5MB
ENTER
SET
2)
20.12.2011 20.12.2011 20.12.2011
3)
20.12.2011 20.12.2011 20.12.2011
1) Press the button up, down, left or right to select a scene or photo to be
played back, and then press the button in the centre to set it.
2) Navigate the operation icons that are displayed on the TV screen with the
remote control for the TV.
1 Operation icons
2 Cancel operation icons
3) To display the operation icons, press the submenu button.
3 Display operation icons
k Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with a HDMI mini cable and then turn on this unit, the input
channel on the TV automatically switches to this unit's screen. If the TV's
power is in standby status, it will turn on automatically (if [Set] has been
selected for the TV's [Power on link] setting).
i Depending on the HDMI terminal on the TV, the input channel may not
switch automatically. In this case, use the remote control for the TV to
switch the input channel.
146
VQT3P24
1)
101-0216
2)
1
3)
1
3
2