Samsung GALAXY Grand Prime User Manual page 279

Bluetooth Settings Operations
●
Enable Bluetooth: In Bluetooth settings, tap the ON/OFF switch to enable.

When enabled, confirmation appears for your phone to be discoverable by other devices.
Follow the onscreen instructions.
●
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
Bluetooth settings, tap the device name in "Available devices" and follow the onscreen
instructions.

Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap SCAN to search again.

This setting is available when Bluetooth is enabled.
●
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
paired device name, tap Rename, enter a new name, and tap RENAME.

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
●
Cancelling Pairing: From Bluetooth settings, tap Settings
then tap Unpair.

This setting is available when Bluetooth is enabled.
●
Enable Service from Paired Device: From Bluetooth settings, tap Settings
device name, and then tap the listing under Use for.

If a confirmation prompt appears, follow the onscreen instructions.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.

Tap the ON/OFF switch to turn the option on.
●
Search for Other Devices: From Bluetooth settings, tap SCAN.

This setting is available when Bluetooth is enabled.
●
Check Files Received via Bluetooth Transfer: From Bluetooth settings, tap MORE > Received
files and follow the onscreen instructions.
●
Rename Your Device for Bluetooth: From Bluetooth settings, tap MORE > Rename device.
Enter a new Bluetooth name for your device and then tap DONE.
Settings
next to a
next to a paired device name, and
next to a paired
270