Tape; Loading A Tape; Playing A Tape - Sony hcd-tb20 Operating Instructions Manual

Tape

Loading a tape

1
Open the lid with your hand and insert
a tape.
With the side
you want to
play facing up
To remove the tape, lift up the tape from the
side as shown in the illustration.
2
Close the lid with your hand.

Playing a tape

You can use TYPE I (normal) tape.
1
Press FUNCTION repeatedly to switch
the function to TAPE.
2
Press TUNER MEMORY/DIRECTION
repeatedly until g appears to play one
side or h (or j * ) to play both sides.
3
Press TAPE nN (or N on the
remote).
Press TAPE nN (or N on the remote)
again to play the bottom side.
* The tape deck stops automatically after repeating
the sequence five times.
GB
18
Downloaded From Disc-Player.com Sony Manuals
To Do this
Stop play Press x.
Press X on the remote. Press again
Pause
to resume play.
Fast-forward or Slide the knob to m or to M
rewind (Press m or M on the remote).
Notes
• If you do not close the lid, you cannot start playing
the tape.
• If you open the lid while playing a tape, the deck
stops playing.