Page 2
NERGY is a U.S. registered mark. As an NERGY partner, Sony Corporation has determined that this product meets the NERGY guidelines for energy efficiency. Downloaded From Disc-Player.com Sony Manuals...
Loading a tape ......... 18 Precautions ..........31 Playing a tape .......... 18 Specifications .......... 33 Recording to a tape — CD Synchro Recording/Recording * European model only Manually/Program Edit ..... 19 Timer-recording radio programs ..... 20 Downloaded From Disc-Player.com Sony Manuals...
Connect the speaker cords to the SPEAKER Set up the AM loop antenna, then connect terminals as the following. Insert this portion Red (3) Jack type A Extend the FM lead antenna AM loop antenna horizontally Black (#) Downloaded From Disc-Player.com Sony Manuals...
Perform the following procedure to protect the CD mechanism. Make sure that all discs are removed from the system. Press FUNCTION repeatedly until “CD” appears. Press FUNCTION while holding down DISC 1 until “LOCK” appears. Unplug the power cord. Downloaded From Disc-Player.com Sony Manuals...
Press . or > on the remote to select “CLOCK SET?”, then press ENTER/YES. Do the same procedures as step 3 to 6 above. Note You cannot set the clock in the Power Saving Mode. Downloaded From Disc-Player.com Sony Manuals...
(see “Programing CD REPEAT/FM MODE until tracks” on page 10). “REPEAT” or “REPEAT 1” disappears. Press CD NX (or N on the remote). * You cannot select “REPEAT” and “ALL DISCS SHUFFLE” at the same time. continued Downloaded From Disc-Player.com Sony Manuals...
“STEP” appears, followed by the number of the track in the programed sequence. The number of the last programed track appears, followed by the total playing time of the program. Last programed Total playing time track number Downloaded From Disc-Player.com Sony Manuals...
Each time you press the button, the display changes cyclically as follows: (Blank space) t A (Upper cases) t a (Lower cases) t 0 (Numbers) t ’ (Symbols) continued Downloaded From Disc-Player.com Sony Manuals...
Page 12
CLEAR on the remote while the character is flashing. You cannot insert characters. To cancel labeling Press MENU/NO on the remote. Downloaded From Disc-Player.com Sony Manuals...
If “TUNED” does not appear and the scanning does not stop Set the frequency of the desired radio station as described in step 2 through 7 of “Setting presets through manual tuning” on page 14. continued Downloaded From Disc-Player.com Sony Manuals...
Page 14
Stop setting Press MENU/NO on the remote. presets Stop scanning Press PLAY MODE/TUNING MODE. Change the Start over from step 1. preset station Change the Start over from step 1. preset number Downloaded From Disc-Player.com Sony Manuals...
“FM” or “AM”. Press PLAY MODE/TUNING MODE until “PRESET” and “AUTO” disappear. Slide the knob to m or to M (or press m or M on the remote) to tune in the desired station. continued Downloaded From Disc-Player.com Sony Manuals...
Tuning). To cancel labeling Press MENU/NO on the remote. To erase the name Tune in the station. Press NAME EDIT/CHARACTER on the remote. Press CLEAR on the remote repeatedly to erase the name. Press ENTER/YES. Downloaded From Disc-Player.com Sony Manuals...
Station name* t Frequency t Program type* t Clock display t Effect name * If the RDS broadcast is not received, the station name and program type may not appear in the display. Downloaded From Disc-Player.com Sony Manuals...
(or j * ) to play both sides. Press TAPE nN (or N on the remote). Press TAPE nN (or N on the remote) again to play the bottom side. * The tape deck stops automatically after repeating the sequence five times. Downloaded From Disc-Player.com Sony Manuals...
• For recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. continued Downloaded From Disc-Player.com Sony Manuals...
Recording starts from the top side. Insert a You cannot use Tape Select Edit for discs containing tape with the side you want to record on over 20 tracks. facing up. Press ?/1 to turn off the system. Downloaded From Disc-Player.com Sony Manuals...
“DBFB” appears in the display and the bass is reinforced. Press again to cancel DBFB. * DBFB: Dynamic Bass Feedback DBFB is factory set to on. Selecting the surround effect Press SURROUND. “SURROUND” appears in the display. Press again to cancel SURROUND. Downloaded From Disc-Player.com Sony Manuals...
To cancel storing the adjustment To cancel the effect Press EQ EDIT again after step 4. Press MUSIC MENU repeatedly until “FLAT” appears. Note When you store a new setting, the previous setting will be canceled. Downloaded From Disc-Player.com Sony Manuals...
Set the time to stop playing following the procedure in step 5. Press . or > on the remote to select the desired sound source. The indication changes as follows: t TUNER y CD PLAY T t TAPE PLAY T continued Downloaded From Disc-Player.com Sony Manuals...
Slide the knob to l or to L (or press . or > on the remote) to adjust the back light brightness. You can adjust the back light brightness in 11 steps from 0 to 10. Downloaded From Disc-Player.com Sony Manuals...
Total number of tracks and total playing time t CD disc title* t Clock display t Effect name * Displayed only when CD title is labeled. Nothing appears when this information is not labeled. Downloaded From Disc-Player.com Sony Manuals...
VCR) to these jacks. You can then record or an MD recorder) to this jack. You can then listen to analogue audio from that component make a digital recording from this system to through this system. that digital component. Downloaded From Disc-Player.com Sony Manuals...
Power Saving Mode, this function does not work. • If the sound is distorted or too loud when selecting “VIDEO,” or you want to switch back to “MD,” repeat the operation described above to switch to “MD.” Downloaded From Disc-Player.com Sony Manuals...
• Connect the speaker cords properly (see page 6). The CD does not eject. • Place the speakers as symmetrically as possible. • Consult your nearest Sony dealer. • Connect only one of the supplied speakers to Play does not start.
Page 29
• The record/playback heads are magnetized. cords as possible. Demagnetize them (see page 32). • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. The tape does not erase completely. • Try turning off surrounding electrical equipment.
You cannot record the tape because the tab has been removed from the cassette. No Tape There is no tape in the tape deck. Open You performed a tape operation with the tape deck lid not completely shut. Downloaded From Disc-Player.com Sony Manuals...
• AC power cord must be changed only at the If you have any questions or problems concerning qualified service shop. your system, please consult your nearest Sony dealer. On placement On the speaker system • Make sure the system fan is on during use.
Page 32
Demagnetize the tape heads and the metal parts that deck. have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette. Downloaded From Disc-Player.com Sony Manuals...
Compact disc and digital audio system Laser Semiconductor laser (λ=795 nm) Emission duration: continuous Frequency response 2 Hz – 20 kHz (±0.5 dB) CD DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 660 nm Downloaded From Disc-Player.com Sony Manuals...
Page 34
Approx. 3.5 kg net per speaker Supplied accessories Remote (1) R6 (size AA) batteries (2) AM loop antenna (1) FM lead antenna (1) Speaker pads (8) Design and specifications are subject to change without notice. Downloaded From Disc-Player.com Sony Manuals...
Page 35
Downloaded From Disc-Player.com Sony Manuals...
Page 36
Sony Corporation Printed in Malaysia Downloaded From Disc-Player.com Sony Manuals...