Troubleshooting; Troubleshooting Guide; General Operation - Panasonic DMR-BCT835 Operating Instructions Manual

Troubleshooting

Troubleshooting guide

Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (O 101)
The followings do not indicate a problem
with this unit:
• Regular disc rotating sounds or HDD
rotating sounds.
• Poor
reception
conditions.
• Image disturbance during search.
• Image disturbance when replacing 3D
discs.
• Interruptions in reception due to periodic
broadcasting breaks.
• When you switch the unit on or to standby
mode, there may be an unexpected sound.
106
VQT4W71
due to atmospheric

General operation

The unit does not work.
• Check the connections. (o 16)
• One of the unit's safety devices may have
been activated.
Reset the unit as follows:
1 Press [i/I] on the main unit to switch the unit
to standby.
• If the unit does not switch to standby,
press [i/I] on the main unit for about 3
seconds. The unit is forcibly switched to
standby. Alternatively, disconnect the
AC mains lead, wait one minute, then
reconnect it.
2 Press [i/I] on the main unit to switch it on. If
the unit still cannot be operated, consult
the dealer.
Cannot eject a disc.
1 While the unit is in standby mode, press
and hold [OK], the yellow button and the
blue button at the same time for more than
5 seconds.
• "00 RET" is displayed on the unit's
display.
2 Repeatedly press [1] (right) until "06 FTO"
is displayed on the unit's display.
3 Press [OK].
The unit is switched to standby mode
automatically.
• VIERA Link has worked. (O 81, Power off
link)