Installing The Main Silencer; Dismounting The Air Filter Box Lid; Installing The Air Filter Box Lid; Removing The Air Filter - KTM 450 EXC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the main silencer

9.93

Dismounting the air filter box lid

9.94

Installing the air filter box lid

9.95

Removing the air filter

x
9.96
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Mount the main silencer. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Reconnect spring
800020-11
–
Pull off the air filter box lid in area
800021-10
–
Insert the air filter box lid into the rear area
800021-11
–
Dismount the air filter box lid. (
–
Hang the air filter holder
air filter with the air filter support.
–
Remove the air filter from the air filter support.
500107-10
M6
.

to the side and remove to the front.


p. 72)
out to the bottom and swing it to the side. Remove the

.

10 Nm (7.4 lbf ft)
and clip it into the front area
72
.
