Mapping Menu, Engine Map - KTM 1190 RC8 R Owner's Manual

CONTROLS

Mapping menu, ENGINE MAP

5.24
Press the MODE but-
ton for 3 - 5 sec-
onds.
Press the MODE but-
ton briefly.
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
• ROAD mode
Alternative 2
• The ignition is on.
• The motorcycle is being ridden.
• ROAD mode
401134-01
–
Press the MODE button briefly and repeatedly until ENGINE MAP appears in the info dis-
play.
ENGINE MAP shows the active mapping for the engine electronics.
Press the button
Press the button
Press the button
and the button
3 - 5 seconds.
Press the MODE but-
ton for 3 - 5 sec-
onds.
Note LOW FUEL in info display goes out
Next display mode
. Changes the mapping
. Changes the mapping
The display changes to the SET‑UP menu
for
Open and exit ENGINE MAP (setting is saved)
40