Canon MX390 series Online Manual page 41

1. Use the
button.
2. When TEL number is displayed, press the OK button.
The fax/telephone number selected from the incoming call logs is displayed.
3. Check the fax/telephone number, then press the OK button.
The fax/telephone number is registered to the machine. Go to next step.
Note
This registration method may not be available depending on the country or region of
purchase.
• Direct entry
The screen to register the recipient's fax/telephone number and name is displayed.
1. Use the
The screen to enter the fax/telephone number is displayed.
2. Use the Numeric buttons to enter the fax/telephone number you want to register.
3. Press the OK button.
The fax/telephone number is registered to the machine. Go to next step.
Note
You can enter the fax/telephone number up to 60 digits (40 digits for the US, Canada,
Korea and some regions of Latin America), including spaces.
For details on how to enter or delete characters:
Entering Numbers, Letters, and Symbols
Press the
When Telephone line type in FAX user settings under Fax settings is set to
Rotary pulse, you can enter a tone ("T") by pressing the Tone button.
9. Make sure that Name is displayed, then press the OK button.
The screen to enter the recipient's name is displayed.
10. Use the Numeric buttons to enter the recipient's name.
Note
You can enter the name up to 16 characters, including spaces.
For details on how to enter or delete characters:
Entering Numbers, Letters, and Symbols
11. Press the OK button to finalize registration.
Note
To register another recipient's number and name to a coded memory dial, select an unoccupied
coded memory dial code and operate in the same procedure when you register.
To return to the Fax standby screen, press the FAX button.
button to select a fax/telephone number or a name, then press the OK
button to select TEL number, then press the OK button.
button twice to enter a pause.