KTM 1190 Adventure R Owner's Manual page 172

16 ELECTRICAL SYSTEM
–
Remove the seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Disconnect plug
S00295-10
–
Plug connector
High beam (H11/socket PGJ19-2) (
–
Position headlight bulb
The headlight bulb is locked into the bulb socket.
S00296-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Install the wind shield. (
p. 106)
p. 118)
p. 126)
x ( p. 120)
p. 129)
1
lightly into the bulb socket, turn it all the way counterclock-
2
.
2 into the new headlight bulb.
p. 207)
1
into the bulb socket and turn it all the way clockwise.
p. 130)
p. 166)
p. 167)
170