16
ELECTRICAL SYSTEM
16.9
Changing the low beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Disconnect plug
S00297-10
p. 106)
p. 118)
p. 126)
(
p. 120)
x
p. 129)
1
lightly into the bulb socket, turn it all the way counterclock-
2
.
p. 166)
168