Removing a Password
To remove a password, select the desired password (Setup and Power On)
to remove and press
6.4.9
CardBus Support
The notebook comes pre-installed with a Windows 95 version which has
built-in support for CardBus.
[Enabled]
does not have built-in Cardbus driver support, you need to disable this
parameter. The default setting is
6-14
or
. If in case you install an older version of Windows 95 which
To verify your Windows 95 version, access the System icon in
the Control Panel. In the System section of the General tab,
verify that the Windows 95 version is 4.00.950 B.
to set it to
[None]
In this case, CardBus Support is set to
[Enabled]
.
.
User's Manual