Table of Contents
Advertisement
Windows 3.x
To enable APM under the Windows environment, run Windows Setup and
select
MS-DOS System with APM
System Information menu. Refer to the Windows user's guide for details.
Windows 95
To enable APM under Windows 95, follow these steps:
1.
Select the Start button, then Settings, then Control Panel.
2.
Double-click on the System icon in the Control Panel window.
3.
Select the Device Manager tab and double-click on System devices.
4.
Double-click on Advanced Power Management support.
If the device is not working properly, select the Settings tab and verify
if the check box for enabling power management support is selected.
Refer to the Windows 95 user's guide for details.
3-14
1.
If you enable the Power Management Mode parameter in
Setup without installing the APM under DOS, Windows or
Windows 95, the system time and date do not display the
correct settings after the notebook returns to normal
operation from standby or hibernation mode. To update
the time and date, reboot the notebook. Enable APM to
avoid this problem.
2.
You can not change any power management parameter in
the Setup screen after APM is enabled because it is
controlled by APM.
Advanced Power Management greatly prolongs battery life.
Use APM whenever possible.
as your computer type in the
User's Manual
Advertisement
Table of Contents
Troubleshooting
