Making Settings In The "Clock" Menu; Making Settings In The "Various" Menu - Blaupunkt BARCELONA 230 Operating And Installation Instructions

User settings
Note:
During the phone call, you can change the
volume directly by means of the volume con-
4
trol .
BEEP
Switching the confi rmation beep on or off . Set-
tings: ON, OFF.
Note:
When storing radio stations, a confi rma-
tion beep sounds even if the OFF setting is
selected.
u Press the On/Off button
setting.
u Turn the volume control
between the settings.
Making settings in the "CLOCK"
menu
CLK DISP
Switch the permanent display of the time on or off .
Settings: ON, OFF.
u Press the On/Off button
setting.
u Turn the volume control
between the settings.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
u Press the On/Off button
setting.
u Turn the volume control
between the settings.
28
3
to change the
4
to change
3
to change the
4
to change
3
to change the
4
to change
SET CLOCK
Setting the time.
u Press the On/Off button
setting.
u Turn the volume control
to set the hours.
u Turn the volume control
the minutes.
Note:
When you set the time in 12-hour mode
( MODE 12H), an "A" is displayed before the
time for the time before noon or a "P" for the
time after noon.
RDS CLOCK (automatic time setting)
(only for reception area EUROPE)
Switching automatic clock setting with clock data
transmitted via RDS on or off . Settings: ON, OFF.
Note:
The time set with the clock data may not be
correct, even if an RDS station is being re-
ceived.
u Press the On/Off button
setting.
u Turn the volume control
tween the settings.
Making settings in the "VARIOUS"
menu
DEMO MODE
Switching the demo mode on or off . Settings:
ON, OFF.
u Press the On/Off button
setting.
u Turn the volume control
between the settings.
In demo mode, the features of the radio are shown
as scrolling text on the display.
3
to change the
4
counterclockwise
4
clockwise to set
3
to change the
4
to change be-
3
to change the
4
to change