Table of Contents
Advertisement
17
SERVICE WORK ON THE ENGINE
Info
Drain the engine oil only when the engine is warm.
Preparatory work
–
Remove the front spoiler. (
–
Stand the motorcycle on its side stand on a horizontal surface.
Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Remove oil screen
–
Remove screw plug
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plugs and oil screens.
–
Position oil screen
Guideline
Oil drain plug
–
Mount and tighten screw plug
Guideline
Oil screen screw plug, small
101917-10
p. 91)
with the O-ring.
with the O-ring.
with oil screen
.
and mount and tighten oil drain plug
M24x1.5
with oil screen
M17x1.5
with the O-ring.
15 Nm
(11.1 lbf ft)
and the O-ring.
12 Nm (8.9 lbf ft)
145
Advertisement
Table of Contents
