KTM 250 DUKE Owner's Manual page 108

13 WHEELS, TIRES
–
Clean the thread of the wheel spindle and screw
–
Clean and grease wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed sensor holder
–
Mount and tighten screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
M00723-10
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
p. 173)

.

in the drill hole.

.

.
 .
 .
M8 25 Nm
(18.4 lbf ft)
M6 8 Nm (5.9 lbf ft)
p. 79)
p. 77)
M8 15 Nm
(11.1 lbf ft)
106