Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Remove the radiator cap
Tilt the vehicle slightly to the right.
100189-10
Pour coolant in until it overflows free of bubbles, and then replace the bleeder screw
immediately.
Alternative 1
Coolant (
Alternative 2
Coolant (mixed ready to use) (
Fill the radiator completely with coolant. Refit the radiator cap.
Place the vehicle on the side stand. Point the fuel tank forwards.
100190-10
Danger
Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.
Start the engine and run it until the 5th bar of the temperature indicator lights up.
and the bleeder screw
P. 154)
P. 155)
.
115
Advertisement
Table of Contents
