Quick Start Example; Version 1.2 - October - Omega Engineering OM-SQ2020 Series User Manual

After installing OMEGALOG
OMEGALOG
the logger. In order to familiarise yourself with the logger the novice user may find this
example Setup useful.
4.1 Startup OMEGALOG
Click on the shortcut icon on your desktop to launch OMEGALOG
your start menu. When the OMEGALOG
Type and communication method is selected.
Logger type can be viewed from the OMEGALOG
changes select Logger Selection from the toolbar or run the Communication Wizard.
(Note: the default communication method is USB and you will need to change this via
the Communication Wizard if you are using any of the other communication methods).
4.2 Synchronise Logger & PC
It is advisable to start by synchronising the Logger clock with the PC clock. See step 1
and 2 below:
Synchronise clocks:

From
®
OMEGALOG Assistant
click on Logger
Setup.
28923
®
an example setfile will be installed within the
®
installation directory. The example file will log the internal temperature of
®
and Select Logger Type

4. Quick Start Example

®
Assistant is loaded, ensure the correct logger
®
Assistant, if you need to make any
 From the Logger
Setup screen select
the Logger Control
tab.
Click on Set
Logger Time to PC
Time, click OK on the
confirmation screen.
®
or select it from

Version 1.2 - October 08

Page 9