Omega Engineering OM-SQ2020 Series User Manual page 15

6.2 Control panel menu
Detailed below is a basic explanation of the top menu structure. For more information on
the whole menu structure please refer to the Help->Help Content->Loggers within
OMEGALOG
6.3.1 Log Control
In this menu you can Arm (activate) or
Disarm (deactivate) the logger.
6.3.2 Meter
Here you can view each channel in Real
Time (at 1-2Hz). Use the enter key to auto
scroll through the channels.
6.3.3 Status
The Status menu gives you access to
information relating to the logger such as
memory and power supply voltage. You
can also override the alarm outputs in
here.
6.3.4 Setup
This contains menus for setting up
Language, Time & Date and the
opportunity to store and recall Setups.
6.3.5 Data Files
This menu allows you to copy data files to
an external memory card (if fitted) and
delete the data files held within the
loggers memory.
6.3.6 Tools
The Tools menu contains maintenance
type functions such as querying the
software version of the logger,
performing a self test and resetting the
logger.
28923
®
.
Version 1.2 - October 08
Page 15