Connections - Omega Engineering OM-SQ2020 Series User Manual

Analog Inputs
As the wiring configuration is dependant upon the sensor type used, it is displayed in OMEGALOG
during the setup. Follow the wiring diagram to attach the required sensor. If you would like to print
the diagrams in more detail or view at a later stage select 'File > Print from Logger Setup'.
The example below shows the actual K type differential thermocouple sensor connected to the OM-
SQ20XX logger from the wiring diagram to the left.
Version 1.2 - October 08
Page 16
Rear view of
ANALOG
connectors
NOTE: Blocks G to K as shown above are

7. Connections

only available on OM-SQ2040 loggers.
Rear view of
ANALOG
connectors
®
28923