Table of Contents
Advertisement
The BNC-16DI incorporates 16 front panel mounted BNC's allowing connection of up to 8 differential analog inputs to the CIO-DAS
and PCI family of data acquisition boards. The BNC-16DI can accommodate boards with either 37 or 50 pin I/O connectors; with
connector P2 used to interface to data acquisition boards utilizing a 37 pin, D type I/O connector, while connectors P3, P4 and P5 are
used to interface to data acquisition boards utilizing a 100 pin I/O connector.
B1-B16
The 16 front panel mounted BNC connectors B1-16, are routed through the enclosure to the rear panel-mounted connectors P2, P3,
and P4.
P2
Connector P2 "IN" is a 37 pin D connector which provides the connection between the 16 analog input BNC's to data acquisition
boards utilizing a 37 pin, D type I/O connector.
P3
Connector P3 "IN" is a 50 pin connector which provides the connection between the 16 analog input BNC's to data acquisition boards
utilizing a 100 pin I/O connector.
P4 & P5
Connector P4 "IN" is a 50 pin connector which provides the connection of the first 8 differential analog input channels to a 32
channel differential data acquisition board. When P4 is used in conjunction with 50 pin connector P5 "OUT", the user can daisy chain
multiple BNC-16DI boxes, allowing connection of up to 32 differential analog input channels to a single 32 channel differential DAS
board (see the diagram on the next page for daisy chain connection scheme).
4
BNC-16DI
Advertisement
Table of Contents
