Table of Contents
Advertisement
The BNC-16SE incorporates 16 front panel mounted BNC's allowing connection of up to 16 single-ended analog inputs to the
CIO-DAS and PCI family of data acquisition boards. The BNC-16SE can accommodate boards with either 37 or 50 pin I/O
connectors; with connector P2 used to interface to data acquisition boards utilizing a 37 pin D type I/O connector, while connectors P3,
P4 and P5 are used to interface to data acquisition boards utilizing a 100 pin I/O connector.
B1-B16
The 16 front panel mounted BNC connectors B1-16, are routed through the enclosure to the rear panel-mounted connectors P2, P3,
and P4.
P2
Connector P2 "IN" is a 37 pin D connector which provides the connection between the 16 analog input BNC's to data acquisition
boards utilizing a 37 pin, D type I/O connector.
P3
Connector P3 "IN" is a 50 pin connector which provides the connection between the 16 analog input BNC's to data acquisition boards
utilizing a 100 pin I/O connector.
P4 & P5
Connector P4 "IN" is a 50 pin connector which provides the connection of the first 16 single-ended analog input channels to a 64
channel single-ended data acquisition board. When P4 is used in conjunction with 50 pin connector P5 "OUT", the user can daisy
chain multiple BNC-16SE boxes, allowing connection of up to 64 single-ended analog input channels to a single 64 channel
single-ended DAS board (see diagram on next page for daisy chain connection scheme).
8
BNC-16SE
Advertisement
Table of Contents
