Specifications - Omega Engineering DP3300 Series User Manual

DP3300 Series User's Manual

SPECIFICATIONS:

STANDARD INPUTS
* 4-20ma 10-50ma 0-5Vdc 0-10Vdc
Thermocouple inputs: J,K,T,E,R,S,B
Cold junction compensation error: +/- 1C (10C to 40C)
Open input indication: HELP displayed
Temperature displayable in Degrees C or F
Non standard inputs available --- consult factory.
ANALOG TO DIGITAL CONVERSION
4-1/2 Digit (20,000) Count) A/D Converter
Dual slope integrating converter with 7 conversions /sec. (typical) rate.
SCAN RATE
Fixed: two channels per second
DISPLAY
Red seven segment displays--0.39" (10mm) digit height
Over range indication: HELP
Display test: Briefly displays 8.8.8.8.8.8.8 on power up.
Seven digit display
SCALE/OFFSET
Scale programmable from 1-30000 units
Offset programmable from 0-99.99 MA (For MA Input)
Offset programmable from 0-9.999 MV (For Voltage Input)
RELIABILITY/ACCURACY
Calibration: NIST traceable (for thermocouples)
Temperature resolution: 1C/1F, 0.1% of Full Scale
Warranty: 1 Year
Recalibration recommended at 12 month interval
POWER REQUIREMENT
* 120Vac --- 60 HZ (Standard)
* 240Vac --- 50 HZ (optional)
* 8Vdc --- 12Vdc (optional)
OUTPUT (optional)
Open collector outputs – 6 open collector outputs, maximum sink capability of 50ma per output
Relays: Single pole single throw, 1 Amp @ 28Vdc or 0.5 Amp @ 120Vac resistive
Output termination: Euro-style plugable connector
DECIMAL POINT:
Programmable: None, 10
COUNT/RATE/RPM/FREQUENCY:
Count Range : 1 – 9999999
Scaler 0.00000 to 99.99999
Division factor: 0 to 65000
Rate Time Base: Programmable 1.000 Seconds to 9999.999 Seconds
(Typical @ 25C and rated supply voltage unless otherwise specified)
th th
position, 100 position, 1000
Rate Range: 0 – 9999999 Frequency Range: 2.00 to 1000000
th
position
Page3
RPM Range: 0 - 9999999